Spiral Bevel Gear Cutters

Spiral bevel gears are bevel gears that have helical cut teeth. The procedure for machining spiral bevel gears is more troublesome than regular bevel gears. In spiral bevel outfit cutting a bend or helix must be cut in the meantime as the bevel. The helix bend is conferred by the distance across of the cutter machining the spiral bevel equip. along these lines cutting spiral bevel gears is a pro range of apparatus cutting or rigging machining.

Pinion & Crown -Wheel Roughing Blades

  1.  Cutter Diameter
  2. Point Width
  3. Whole Depth of the Gear or Pinion to be cut
  4. Type of cutter body used (i.e. RIDG Ac, Soft Body, etc)
  5. Pressure Angle of O.B & I.B Blades
  6. No. of blades per set
  7. Blade Edge Radius

Crown – Wheel Finishing Blades

 

  1. Cutter Diameter
  2. Point Width
  3. Pressure Angle of O.B & I.B Blades
  4. Blade Edge Radius

Pinion Finishing Blades (Concave & Convex)

 

  1. Point Width
  2. Type of cutter body used
  3. Point width of roughing Blades
  4. Pressure Angle
  5. Top Term Letter
  6. Blade Edge Radius
  7. No. of blades per Set

Oerlicon Blanks

 

  1. 7.5 x 9 x 95 mm
  2. 7.5 x 9 x 100 mm
  3. 13.5 x 17 x 110 mm
  4. Material : H.S.S AISI -M2, M35

Spiromatic Blades

 

  1. From Dia. 70 mm to 108 mm suitable for Oerlicon Spiral Bevel Gear Machines
  2. Material : H.S.S AISI – M2

Curvex Type Blades (L.H & R.H)

 

  1. Manufacture in both with Toprem and without Toprem, suitable for WMW Spiral Bevel Gear Machines
  2. 75 mm Dia – Set of 8 Blades
  3. 106 mm Dia. – Set of 10 Blades
  4. 150 mm Dia. Set of 12 Blades
  5. 212 mm Dia – Set of 16 Blades
  6. 300 mm Dia – Set of 18 Blades
  7. Material : H.S.S AISI – M2

Rack Shaper Cutter

 

  1. Suitable for MAG & Sunderland machines
  2. Material : H.S.S AISI – M2